Details for Therma Grow Greenhouse Heaters

SPECIAL ORDER ITEM- PLEAE ALLOW 4-6 WEEKS FOR DELIVERY

Formally called GREENGRO

As the only heater CSA certified specifically for greenhouse heating, the Therma Grow advanced technology saves you 20% in fuel costs while delivering a CO2 enriched environment that exceeds all greenhouse combustion and environment safety standards.

These units can be mounted either inside or outside. With the Therma Grow there are fully enclosed electronic controls, a standard gas valve and motor, and no expensive heat exchanger to fix or replace. Safety features include a totally enclosed flame, built-in temperature protection and air flow safety devices.

Specifications

PART # MODEL # VOLT FUEL B.T.U. MAX
E78-0125 THERMA GROW 120 Plus       120 PROPANE 120,000
E78-0126  THERMA GROW 120N Plus    120 NATURAL GAS 120,000
E78-0225DV THERMA GROW 220 Plus       240 PROPANE 220,000
E78-0226DV THERMA GROW 220N Plus    240 NATURAL GAS 220,000

Note: Proper installation for each Therma Grow heater requires adequate air exchange.  Refer to Installation Manual.

Vent Kits

E78-0001 VENT KIT – INDOOR MOUNT
CONSISTS OF:  (1) EVPES12 12″ I/O SHUTTER FAN W/CORD (FOR EXHAUST)
  (1) E78-0032 AIR INLET TRANSITION KIT (6″ x 12ft. ducting, collar adapter and ST.ST. panel, which fastens to the motorized inlet shutter)
  (1) E78-0034 INLET SHUTTER W/MOTOR (RSO 15-1/2 x 15-1/2″)
   
E60-1116 INLET HOOD (optional)
   
E56-0016 VENT KIT – OUTDOOR MOUNT 
CONSISTS OF: (1) MOTORIZED ALUMINUM SHUTTER (RSO 16″ x 16″)
  (An outdoor mount kit is also required, but not included- see Accessory section below)

Accessories

PART # DESCRIPTION
E53-5402 T-15-WD SINGLE SPEED THERMOSTAT, 10AMP 110/220V
E78-0017 LB WHITE 2 STAGE THERMOSTAT
E78-0015 INDOOR MOUNT (EYEBOLT & CHAIN KIT) 120/220
E78-0013DV OUTDOOR MOUNT KIT 120
E78-0014 OUTDOOR MOUNT KIT 220
E78-0035 DIFFUSER W/FLANGE GLV (THERMA GROW 120)
E78-0036 DIFFUSER W/FLANGE GLV (THERMA GROW 220)
E78-0022DV DUCT ASSEMBLY (120) for use when outside mounting
E78-0023 DUCT ASSEMBLY (220) for use when outside mounting
E78-0025 DUCT KIT (220) used to connect to overhead ducting