Details for L-40 Low Pressure Radiant Heat Brooder
Wide, Consistent Heating Area
The L-40 produces a wider, more temperature consistent heat zone than leading competitive low pressure brooders, giving birds more options to find their comfort zone.
Low Profile
The L-40 is only 14″ tall and has a lower profile than most other competitive brooders, taking up less room in a house and making it easier to handle and work around.
Energy Efficient
The L-40 utilizes more surface area on its smaller emitter than competitive units, yet creates a bigger heated area on the ground.
Specifications
| PART# |
MODEL # |
DESCRIPTION |
| E68-6140 |
L-40 |
LOW PRESSURE BROODER |
| E68-6137 |
|
.375″ x 75″ GAS HOSE |
| E68-6138 |
6553 |
LP REGULATOR (06553) 1 PER 8 UNITS REQUIRED |
| E53-4967 |
SPS-24 |
24 VOLT VAC TRANSFER |
| E68-6180 |
573477 |
IGNITION CONTROLLER |
| E68-6182 |
573481 |
GAS CONTROL VALVE ASSEMBLY |
| E68-6183 |
573482 |
MANIFOLD ASSEMBLY |
| Model Numbers |
L-40 |
| Input (Btu/h): |
40,000 |
– Heater Configurations available
– Spark Ignition |
Yes |
Installation Height (ft.):
– Broilers
-Turkeys |
5 – 6
4.5 – 5.5 |
| Center Spacing (ft.) |
25 – 40 |
Inlet Gas Supply Pressure:
– Propane (inches of W.C.)
– Natural Gas (inches of W.C.) |
11 – 14
7 – 14 |
Fuel Consumption (max.):
-Liquid Propane Gas (lbs./hr.)
-Natural Gas (cu. ft./hr.) |
1.85
40.0 |
| Ventilation (CFM) |
468 |
Temperature Controls Available:
-Wired to House Environmental Control* |
Yes |
Electrical Requirements:
– Spark Ignition |
24 VAC / 60HZ |
Minimum Clearance to Combustibles (in.):
-Top
-Side
-Below |
14
36
54 |
Dimensions (in.):
-Height
-Canopy Diameter |
14
31.5 |
| Net Weight (lbs.) |
13.5 |
| Canopy |
Polished Aluminum |
| Stainless Steel Radiant Emitter |
Standard |
| 1/4″ x 6ft. Gas Hose (up to 25ft.) |
Optional |
| Regulator (Zone Control Panel) |
Optional |
| Gas Cock and Piping Hardware |
Optional |
| CSA Certified (USA and Canada) |
Yes |
*When used with a house environmental control, the L-40 can be operated as an on/off or a multiple-stage heating system. 115 VAC/60HZ is required.