These models are designed to install flush to the inside wall. The heat exchange core is accessible from inside the building, for easy cleaning or removal. 7-45 & 8-70 have a vertical split core for easy handling and cleaning.
| PART# | MODEL# | DESCRIPTION | |
| E58-0009 | 7-45 | HEAT EXCHANGER RSO 88″W x 48-3/4″H | |
| ALSO REQUIRED FOR INTAKE AND EXHAUST (7-45): | |||
| E50-0204Q | 4E40Q 16″ MULTIFAN PANEL EXHAUST FAN | ||
| E50-6202Q | TF4E30Q 12″ INTAKE TUBE FAN | ||
| E58-0042 | 12″ ROUND DIFFUSER C/W VANES | ||
| E62-4220 | FIXED AIR INLET LOUVRE 14X20 – FITS IN THE END OF 7-45 | ||
| E58-0016 | TOP INLET 7-45 KIT OPTION | ||
|
MATERIAL KIT TO MOUNT INLET DUCT ON TOP OF HEAT EXCHANGE FOR AIR ENTRY FROM ATTIC SOFFIT OR WIND HOOD. PROVIDES BETTER WIND AND FROST PROTECTION AND RAIN / SNOW DEFLECTION. MINIMAL CUTTING AND ASSEMBLY REQUIRED ON SITE. |
|||
| E58-0011 | 8-70 | HEAT EXCHANGER RSO 96″W x 72-1/2″H ** | |
| NOTE: SIDE AIR INLET DUCT NO LONGER REQUIRED WITH NEW 8-70. | |||
| ALSO REQUIRED FOR INTAKE AND EXHAUST( 8-70): | |||
| E50-0205Q | 4E45Q 18″ MULTIFAN PANEL EXHAUST FAN | ||
| E50-6203Q | TF4E35Q 14″ INTAKE TUBE FAN | ||
| E58-0043 | 14″ ROUND DIFFUSER C/W VANES | ||
| E62-4236 | FIXED AIR INLET LOUVRE 11-1/2 x 36 – FITS ON THE END OF AIR INLET DUCT | ||
| E58-0017 | TOP INLET 8-70 KIT OPTION | ||
|
MATERIAL KIT TO MOUNT INLET DUCT ON TOP OF HEAT EXCHANGE FOR AIR ENTRY FROM ATTIC SOFFIT OR WIND HOOD. PROVIDES BETTER WIND AND FROST PROTECTION AND RAIN / SNOW DEFLECTION. MINIMAL CUTTING AND ASSEMBLY REQUIRED ON SITE. |
|||
Note: 8-70 and 7-45 can be ordered with an access door to the core on the outside of building.
| PART# | MODEL# | DESCRIPTION |
| E58-0009S | 7-45S | INSIDE HEAT EXCHANGER FS 87″ x 27-1/2″ x 48″H – REQUIRED TO FIT ON PIT PLENUM 87″LONG x 27-1/2″ DEEP |
| ALSO REQUIRED FOR INTAKE AND EXHAUST: | ||
| PAGE 2.1a | 12-16″ AGRIFAN | |
| E50-6202Q | TF4E30Q 12″ INTAKE TUBE FAN | AIRBAGS OR DUCTING MAY BE RECOMMENDED FOR INTAKE SYSTEM |
| E58-0042 | 12″ ROUND DIFFUSER C/W VANES | |
Note: Custom design heat exchangers for swine can be considered.
OPTIONAL LABOUR ESTIMATES FOR TOP INLET KIT ONLY (E58-0016 / E58-0017), LABOUR CHARGES WILL BE BILLED TO THE DEALER FROM EXACON
1. Round trip travel from Exeter __ hours @ $80.00
2. Install Inlet One Storey Kit __ hours @ $80.00
3. Install Inlet Two Storey Kit __ hours @ $80.00
NOTE: ASSISTANCE MUST BE PROVIDED BY THE DEALER PLUS EQUIPMENT FOR TWO STOREY INSTALLATION OF TOP INLET KIT MUST ALSO BE PROVIDED BY THE DEALER OR CUSTOMER.
| PART# | DESCRIPTION |
| E58-0020 | 7-45/7-70 REPLACEMENT TUBES (46″ long) |
| E62-4033 | 14″ x 12″ INSULATED FLEX DUCTING (per/ft) |
| E62-4043 | 14″ x 25FT INSULATED FLEX DUCT (per/roll) |
| E62-1136 | 36″ NYLON TIE (max. 10″ diameter) |
| E58-0091 | 14″ GALVANIZED MODULE (approx. 12″ long) |
| E58-0092 | 14″ GALVANIZED INTAKE BOOT |
| E58-0094 | 14″ x 36″ GALVANIZED INSULATED EXTENSION |
| E58-0097 | 14″ GALVANIZED ADAPTOR (approx. 6″ long) |
